Lifeguard Skin Introduction and Construction

3M™ vinyl wrap films are made for use it right out of the box. There's no need to print or apply an overlaminate. And, since they're manufactured with dual color layers for dimensional stability and durability, you can depend on them not to discolor or deform even around the craziest of curves. 
  • Available in five styles: matte, satin, gloss, carbon fiber, and brushed metal
  • Pressure-sensitive adhesives
  • Invisible, air-drain channels for bubble-free results
  • Semi-permanent and removable
  • 7 year life for Matte, Satin, and Gloss
  • 5 year life for Carbon Fiber and Brushed Metal
Construction procedure
  • Clean the dust on the camera or lens surface before construction.
  • Requires glue forceps (supplied) and hairdryer.
  • Paste on the order of instructions.
  • First pre paste on right position, can be redo if position not fitted
  • When the position is correct, pressurize the film. The edge position/joint position and the curved portion need to be heated and then pressurized.
  • If needed to remove the film in the future, just heating it and then removed, the film without leaving adhesive & without leaving marks.